Shower Repairs Slough

Your shower is leaking. No hot water. Low water pressure. You need a shower repair. Sounds familiar to you? Our licensed plumbing specialist and Slough plumbers can work on, repair, and install all makes and models of showers. Whatever the case may be you can rest assured knowing that Atapos Heating can take care of the issue quickly and comprehensively. You can trust us when we say that we’ve seen it all before when it comes to shower problems, and we’re equipped to work with all types of shower units, regardless of function and manufacturer.

Read our guide below to find out about the most common problems with showers, such as leaking shower heads, blocked showers, low water pressure, no hot water, and drains that need unblocking. You’ll also find out about the shower mixer installation service, the costs of shower repairs, and the costs of shower mixer installation.

The Most Common Common Shower Problems

Leaking Shower Heads

A leaking showerhead is one of the most common shower repairs. It is usually caused by a worn-out washer or damaged O-ring. To fix it, you can try to tighten the connections or replace the washer or O-ring. If it does not fix the problem, it may be necessary to replace the shower head altogether. This can be done by purchasing a new showerhead and following the manufacturer’s instructions for installation. However, if you aren’t an experienced DIYer, it would be vital to hire a professional plumber who has the expertise and professional tools to fix the leaking shower head.

Blocked Showers

Shower blockages are a frustrating and unpleasant experience that many homeowners face. Hair, soap scum, and other debris that accumulates in the drain can all contribute to a clogged shower. A clogged shower, if left unattended, can cause water damage, mould growth, and even health risks. How to avoid clogged showers? Clean the drain on a regular basis and use a drain cover to catch any debris. If your shower is clogged, you have several options, including using a plunger, a drain snake, or a chemical drain cleaner. If these methods do not work, you may need to hire a professional plumber.

Low Water Pressure

A clogged showerhead, a faulty valve, or a blocked pipe are all possible causes of low water pressure. You can try cleaning the showerhead, replacing the valve, or unblocking the pipe to fix it.

Blocked Drain

A blocked drain can cause many problems, including unpleasant odours, slow draining water, and in severe cases, even flooding. The most common causes of a blocked drain are a buildup of grease, hair, soap scum, and foreign objects. To unblock a drain, there are several solutions you can try, such as using a plunger, a drain snake, or a chemical drain cleaner. If these methods fail, it may be necessary to seek the help of a professional plumber who has specialised tools and expertise to remove stubborn blockages. Remember that regular maintenance and preventative measures can also help to prevent drain blockages.

No Hot Water

No hot water is a frustrating problem that can occur in your home. When there is no hot water, it can disrupt your daily routine, making it difficult to take showers or wash dishes. There are several reasons why there may be no hot water, including a faulty water heater, a malfunctioning thermostat, or a power outage. To fix the problem with no hot water, you can check the circuit breaker, the pilot light, and the temperature settings on the water heater. If these solutions do not work, it may be necessary to seek the help of a professional plumber who can diagnose and fix the issue. It is vital to remember that regular maintenance and inspections of your water heater can also prevent future problems.

Cost of Shower Repairs Slough

Atapos Heating boasts the lowest hourly rate in the region of £70+VAT. If the work will take longer than one hour, the price is negotiated beforehand, which means the total price, including materials, is given for the entire job, so our clients know in advance how much the plumbing job will cost.

Shower Mixer Installation

Shower mixer installation is the process of fitting a shower mixer to regulate the temperature and flow of water in a shower. A shower mixer allows you to control the hot and cold water to achieve a comfortable temperature. The installation process involves disconnecting the old shower fittings, making sure the pipes are clean and free of debris, and fitting the new shower mixer onto the pipes. Proper installation of a shower mixer is crucial to ensure the safety and effectiveness of the shower mixer. It is recommended that you seek the help of a professional plumber to install a shower mixer to ensure it is done correctly and to avoid any damage to your plumbing system.

Cost of Shower Mixer Installation

Proper shower mixer installation is essential to ensure the safety and effectiveness of the shower mixer. While it is possible to install a shower mixer on your own, it is recommended to seek the help of a professional plumber because of costly repairs and potential hazards. Professional installation of a new shower mixer will cost £80 + VAT and take one hour to complete.

If you are not comfortable doing these repairs yourself, it is best to seek the help of a professional plumber. At Atapos Heating, our qualified and experienced plumbers can diagnose the problem and provide you with the best solution possible. Our Slough engineers have the necessary tools and expertise to fix any shower-related issues.

Need Shower Mixer Installation? Shower Repair? Contact us Today!

The professional team at Atapos Heating have many years experience in shower repairs and shower replacement. We provide plumbing services 24 hours a day in Slough. Call us at 07583 894 714 to check availability.